Zero Dead Zones.
Wi-Fi 6/6E.
Everywhere.
AIT designs, installs, and validates enterprise wireless networks for offices, warehouses, healthcare facilities, and campuses — predictive RF modeling, professional AP placement, and post-installation heat mapping guarantee full coverage everywhere.
Watch a complete enterprise wireless deployment.
From predictive RF survey to post-deployment heat map — see how AIT designs and installs a zero-dead-zone wireless network. RSSI targets met on every walkthrough.
From RF model to validated coverage.
A five-step process from predictive survey to heat-map-validated handoff.
Predictive RF Survey
Model your floor plan in professional site survey software, placing APs for optimal channel use, coverage overlap, and RSSI targets before a single AP is installed.
Site Walk
Certified wireless tech walks your space verifying construction materials, interference sources, and confirming every AP mounting location.
Installation
APs installed to final mounting locations, cabled with Cat6A PoE drops. VLANs, SSIDs, band steering, and power levels configured.
Post-Deploy Validation
Walk entire coverage area with survey software capturing real RSSI heat maps, SNR, and retry rates. We don’t leave until targets are met.
Documentation & Handoff
Deliver heat map report, AP placement diagram, VLAN/SSID documentation, RADIUS config, and channel plan.
Hardware Ecosystem
AIT installs enterprise wireless platforms from the vendors your IT team trusts — no gray-market hardware.
Indoor Enterprise APs (Wi-Fi 6E)
Tri-band 2.4/5/6GHz enterprise APs with WPA3, 4×4 MU-MIMO, 160MHz channel support, and OFDMA. Single PoE+ cable powers the AP and provides 2.5Gbps backhaul.
Outdoor APs (IP67-Rated)
IP67-rated outdoor enterprise APs for warehouses, parking structures, and campuses. Omni-directional and sector directional options. PoE-powered.
PoE+ Managed Switches
PoE+ managed access switches with 10G fiber uplinks. Powers and connects APs, cameras, access control readers, and VoIP devices through a single Cat6A cable.
Cloud Wireless Controller
Cloud-managed wireless controller with RF optimization, firmware management, real-time client analytics, and unified policy across all sites.
RADIUS / 802.1X Auth Server
Enterprise authentication via WPA3-Enterprise and 802.1X. Users authenticate with identity credentials. Supports certificate-based auth, LDAP, and Active Directory integration.
Ekahau / iBwave Survey Tools
AIT uses Ekahau for predictive AP placement and post-deployment validation. Every project gets a real heat map — RSSI, SNR, and retry rate.
Every environment. Zero compromises.
From open-plan offices to RF-challenging healthcare facilities — AIT designs wireless networks that perform.
Open-Plan Office
Dense user environments with high device count per AP. Band steering, OFDMA, and BSS coloring manage airtime efficiently. Target: -65 dBm RSSI, >25 dB SNR.
Warehouse & Distribution
High ceilings, metal racking, and forklifts create RF challenges. Directional antennas, high-gain APs, and downward-facing mounts achieve full floor coverage.
Healthcare & Clinics
HIPAA-conscious VLAN segmentation separating clinical, guest, and device traffic. RF planning around medical equipment interference.
K–12 & Higher Education
Campus-wide coverage with SSID segmentation for students, staff, and IoT. Outdoor APs for athletic fields and quads. High-density classroom APs for 30+ device rooms.
Multi-Tenant & Hospitality
Per-tenant VLAN isolation, captive portal for guest Wi-Fi, and bandwidth throttling. Seamless layer-3 roaming across floors and buildings.
Wireless Overlay / Upgrade
Upgrading from Wi-Fi 5? AIT overlays new Wi-Fi 6E APs on your existing cabling, reconfigures the controller, and re-validates coverage.
Coverage guaranteed before we leave.
We validate every coverage area with real measurement tools before project closeout.
Predictive Design First
Every project starts with a predictive RF model in Ekahau. AP count, placement, channel plan, and power levels designed on paper before any hardware is purchased.
Post-Deployment Walk Survey
After installation, we walk the entire coverage area capturing RSSI, SNR, and retry rate maps. We don’t close the project until targets are met everywhere.
Seamless Layer-3 Roaming
APs configured for fast BSS transition (802.11r) and PMK caching. VoIP and video calls stay active as users roam between floors and APs.
VLAN & RADIUS Documentation
Complete documentation of SSID-to-VLAN mappings, RADIUS server config, AP group policies, and channel plans — delivered for your IT team.
Right-sized for every wireless project.
From a small office to a multi-building campus — AIT designs and validates every deployment.
Small Office
Multi-Floor Office
Campus / Warehouse
Wi-Fi Upgrade
Everything you need to know.
A typical open-plan office needs one AP per 1,500–2,500 sq ft. Dense environments need one AP per 500–800 sq ft. We determine the exact count with a predictive RF survey included in every project proposal.
Predictive RF design uses Ekahau to model your floor plan — including wall types and materials — and simulate AP placement before hardware is installed. We test different AP counts virtually, optimizing coverage before purchasing equipment.
Wi-Fi 6 offers higher throughput, better efficiency in dense environments via OFDMA and BSS coloring, improved battery life via TWT, and WPA3 security. Wi-Fi 6E adds the 6GHz band for additional clean spectrum.
Yes. We replace existing APs with Wi-Fi 6E hardware on your existing Cat6 cabling, reconfigure the controller, and re-validate coverage with a fresh heat map.
Yes. We configure WPA3-Enterprise + 802.1X with RADIUS server integration — either your existing RADIUS/NPS server or a hosted solution we provision.
Post-deployment Ekahau heat maps, AP placement diagram, channel and power plan, SSID-to-VLAN mapping, RADIUS config backup, and controller config export.
AIT designs and validates enterprise wireless networks across Chicago Metro, IL and IN.
Predictive RF design, professional installation, and post-deployment heat map validation. Get a free site assessment.